View EAST1916GRA0_8981783.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 201 3 , everlight all ri ghts reserved. release date : may.15 .2013 . issue no: dse - 000 0153 rev. 4 www.everlight.com smd ? b EAST1916GRA0 features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? mono - color type. ? pb - free . ? the product itself will remain within rohs compliant version. ? compliance with eu reach ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm) . description ? the smd led is much smaller than lead frame type components, thus enable smaller board s ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use.
datasheet smd ? reflector EAST1916GRA0 2 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com device selection guide chip materials emitted color resin color g6 algainp brilliant yellow green water clear r6 algainp brilliant red absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f g6 : 25 r6 :25 ma peak forward current (duty 1/10 @1khz) i fp g6 : 60 r6 : 60 ma power dissipation pd g6 :60 r6 : 60 mw operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 90 electrostatic discharge esd hbm sur: 2000 sub: 2000 v soldering temperature t sol reflow soldering : 260 for 1 0 sec. hand soldering : 350 for 3 sec. electro - optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv g6 : 22.5 r6 : 45.0 ----- 57.0 90.0 mcd i f = 20 ma viewing angle 2 1/2 ----- 1 3 0 ----- - deg peak wavelength g6 : ---- - r6 : ----- 575 632 ------ ------ nm dominant wavelength g6 : ----- r6 : ----- 573 624 ------ ------ nm spectrum radiation bandwidth g6 : ----- r6 : ---- - 20 2 0 ------ ----- nm forward voltage v f g6 : 1.7 r6 : 1.7 2.0 2.0 2.4 2.4 v reverse current i r g6 : ----- r6 : ----- ----- ----- 10 10 a v r =5v notes: 1. tolerance of luminous intensity 11%
datasheet smd ? reflector EAST1916GRA0 3 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com bin range of luminous intensity g6 bin code min. max. unit condition m2 22.5 28.5 mcd i f = 20 ma n1 28.5 36.0 n2 36.0 45.0 p1 45.0 57.0 r6 bin code min. max. unit condition p1 45.0 57.0 mcd i f = 20 ma p2 57.0 72.0 q1 72.0 90.0 notes: tolerance of luminous intensity 11%
datasheet smd ? reflector EAST1916GRA0 4 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com typical electro - optical characteristics curves g6 ta=25c relative luminous intensity ambient temperature t (c ) a % ) ( relative luminous intensity ( ) % wavelength (nm) ta=25c forward voltage v (v) f forward current i (ma) relative luminous intensity ( ) % forward current i (ma) ta=25c ambient temperature t (c a ) forward current i (ma) ta=25c
datasheet smd ? reflector EAST1916GRA0 5 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com typical electro - optical characteristics curves r6 relative luminous intensity ambient temperature t (c ) a % ) ( relative luminous intensity ( ) % wavelength (nm) ta=25c forward voltage v (v) f forward current i (ma) relative luminous intensity ( ) % forward current i (ma) ta=25c ambient temperature t (c a ) forward current i (ma) ta=25c ta=25c
datasheet smd ? reflector EAST1916GRA0 6 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com package outline dimensions note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? reflector EAST1916GRA0 7 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromaticity coordinates & dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
datasheet smd ? reflector EAST1916GRA0 8 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com carrier tape dimensions: loaded quantity 2 000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
datasheet smd ? reflector EAST1916GRA0 9 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he l eds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. pre-heating 150~200c 60~120sec. 3c/sec.max. above 217c 60~150sec. 260c max. 10sec. max. 6c/sec.max. above255c 30sec.max.
datasheet smd ? reflector EAST1916GRA0 10 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 35 0 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figur e). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
datasheet smd ? reflector EAST1916GRA0 11 copyright ? 201 3 , everlight all rights reserved. release date : may.15 . 2013 issue no: dse - 000 0153 rev. 4 www.everlight.com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight americas before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document.

▲Up To Search▲

Price & Availability of EAST1916GRA0

	To Download EAST1916GRA0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .